Discreet warmth, respect for silence and surroundings

Fargau infrared heaters provide gentle and even heat in churches, mosques, synagogues, temples and places of prayer .

They allow heating only in occupied areas, without noise and without altering the atmosphere of the place.

The main advantages:

• Instant and silent heat

• No air circulation , ideal for preserving peace and quiet

• Discreet and integrated installation

• Energy saving : heating by useful zones

• Compatible with old or listed buildings

Why choose infrared heating for a place of worship?

Religious buildings often have very tall volumes and limited insulation .

Hot air systems are inefficient: the heat rises and the floor remains cold.

Infrared radiant heating , on the other hand, directly heats the worshippers and the pews, without unnecessarily heating the entire space.

In practice:

• Localized heating on benches, aisles or prayer areas

• Installation is possible on walls, ceilings, or existing structures.

• Silent operation, without fan

• No maintenance required, ready to use immediately

• Can be used occasionally or continuously

Typical applications

• Churches and chapels (heating of pews and aisles)

• Mosques and places of prayer (heating of the main area)

• Temples and synagogues (discreet and targeted heating)

• Religious or community multipurpose rooms

👉 Fargau radiant heaters adapt to the height and configuration of each location, with a simple and neutral aesthetic.

Sizing and installation

The sizing depends on the height, the usable area and the level of insulation.

On average:

• 1.5 to 2.5 kW per zone of 6 to 10 m² depending on the opening and height.

• Installation possible at a height of 2.5 m to 5 m , oriented towards occupied areas.

• Simple control via switch, dimmer or timer

💡 Our experts can propose a complete site plan , respecting the aesthetics and architectural constraints of the location.

Technical points

• Ingress Protection (IP) rating : IP44 minimum for indoor areas, IP55 if near openings

• Mounting : wall, ceiling or suspended depending on the architecture

• Materials : Discreet lacquered aluminum body, customizable color

• Options : dimming, manual or automatic control

• Optimized consumption : intermittent operation, no losses in air volume

Why choose Fargau

• Over 15 years of experience in professional infrared heating

• Specific expertise in places of worship and heritage buildings

• Silent, discreet and effective solutions

• Made in Europe , minimum 2-year warranty

• Customized studies and on-site support

FAQ – Heating for Places of Worship

Why is infrared heating suitable for churches and mosques?

Because it heats people and surfaces directly, without loss in high volumes. It is quiet and discreet.

Can only occupied areas be heated?

Yes, that's actually the best approach: each radiant heater heats a specific area (benches, walkways, platforms, etc.) for targeted comfort.

Is the system compatible with older buildings?

Absolutely. Radiant heaters are easy to integrate and do not require major construction work or ductwork.

Is it energy efficient?

Yes. Consumption is controlled because heat is produced only where it is needed, without waste in the air volume.

VIEW PRODUCTS IN THIS CATEGORY

Need a discreet and effective study?

Send us a plan or photos of your place of worship.

Our experts will advise you on the most suitable solution , optimal power and discreet positioning for immediate comfort and respect for the location.